PDS33 Solar Pump Controller
PDS33 Solar Pump Controller adopts a new hardware technology platform and uses the MPPT algorithm to maximize the conversion efficiency of the equipment. The output AC can be applied to various constant water pumps; DC and AC input are supported. When there is no solar energy, the controller can be switched to a single-phase or three-phase AC input such as a generator or mains power. The PDS33 solar pump controller provides a remote monitoring solution that can remotely monitor various operating data and operational fault information of the equipment.
Product features
Flexible
Compatible with IEC standard three-phase asynchronous motor |
Compatible with mainstream PV modules |
Can be switched to mains supply |
|
Smart
Adaptive MPPT technology, with an efficiency up to 99% |
Automatic adjustment of water amount |
Adaptive motor power |
|
Cost-effective
Out-of-the-box system design |
Built-in motor pump protection |
Without storage battery design, suitable for a variety of applications |
easy to maintain |
Reliable
Leading motor & drive technology, 10 years market experience |
Soft start shall avoid water hammer effect, extending system life span |
Built-in smart IGBT module, simplified system design, to improve system reliability
|
Built-in over-voltage, over-heat and dry-conversion protection |
Remote monitoring
Standard RS485 interface |
Optional GPRS module for remote monitoring |
Monitors solar water pump parameters anytime anywhere |
Historical parameters are available |
Supports Android/iOS monitoring APP and PC web terminal |
|
Product parameters
The input parameters
Pv array input: |
|
Maximum input voltage(Voc)[V]: |
450V DC / 800V DC |
Recommend MPPT voltage range(Vmp): |
280~360V DC / 500V DC~700V DC |
Recommended pv array power range[kW]: |
2.7~3.5 / 2.7~3.5 / 4.5~6.4 / 6.6~8.8 / 9~12 / 13.2~17.6 / 18~24 / 22.2~29.6 |
Backup AC power generator: |
|
Maximum current(RMS)[A]: |
23 / 5.8 / 10.5 / 14.6 / 20.5 / 26 / 35 / 38.5 |
Output parameters
Rated output[kW]: |
2.2 / 2.2 / 4 / 5.5 / 7.5 / 11 / 15 / 18.5 |
Rated output voltage: |
220V AC(±15%)three-phase / 380V AC(±15%), three-phase |
Maximum current(RMS)[A]: |
9.6 / 5.1 / 9 / 12 / 17 / 25 / 32 / 37 |
The output frequency: |
0-50Hz/60Hz |
To protect the
Lightning protection: |
built-in |
Over voltage protection: |
built-in |
Under voltage protection: |
built-in |
Motor block transfer protection: |
built-in |
The output lacks phase protection: |
built-in |
Short circuit protection: |
built-in |
Overheating protection: |
built-in |
Dry smoke protection: |
built-in |
Communication
RS485 Communication interface: |
Standard, isolated RS485, Modbus protocol |
Conventional parameters
Operating temperature range: |
-20ºC~+60ºC;>45ºC,Reduced load operation |
The cooling way: |
Forced air cooling |
Allow ambient humidity: |
<=95%RH |
Overall dimensions[H*W*D][mm]: |
186*130*154.8 / 241*162*180.2 / 360.5*182*195.4 / 385.5 *219*196.9 |
Gross weight (kg): |
2.8 / 4.2 / 9.0 / 10.8 / 11 |
Standard warranty (month): |
18 |
Certification standards: |
IEC/EN 61800-5-1,IEC/EN 61800-2:2004,IEC/EN 61800-3:2004,CE |
Model type: |
PDS33-4T022 / PDS33-4T030 / PDS33-4T037 / PDS33-4T045 / PDS33-4T055 / PDS33-4T075 / PDS33-4T093 / PDS33-4T0110 |
Backup alternator
The input voltage: |
220V AC(±15%)Single phase / 380V AC(±15%),three-phase |
Generator capacity[kVA]: |
4 / 4 / 5.9 / 8.9 / 11 / 17 / 21 / 24 |