PD20 Smart Pump Drive
PD20 Smart Pump Drive Series is a new generation of high-end intelligent integrated ultra-high protection water supply special products independently researched & developed by SAJ. The product body is dustproof and waterproof, and can be installed on various brands of pump motor terminal boxes, and can be accessed in various types of sensor signal. Featuring simple operation, good reliability, low noise and high performance, the system is equipped with dual independent RS485 interface, independent RTC, can achieve multi-pump control for both the main and auxiliary pumps; when the main machine controls the auxiliary machine through RS485, communication with other smart device or host computer can be achieved through another RS485.
Product features
Superior protection grade
| Excellent dust and water resistance effect |
Fine joints, light and stable |
Design as per standard international certification requirements
| CE certification, export in package |
Improved water supply function
| Dual 485, applicable for monitoring + connection |
RTC function, to support timed programmable application |
| Fully enhance the special functions of the pump |
|
European appearance design concept
| Delicately designed to show quality |
Accurate manufacturing, trustworthy |
Product parameters
Control characteristic
| Control mode: |
V/Fcontrol |
| Start torque: |
1Hz 100% |
| Speed regulation range: |
1:20 |
| speed-holding precision: |
±1.0% |
| Overload capability: |
120% rated current for 60s, 150% rated current for 1s |
| V/F curve: |
Linear, squared curve |
| Acceleration/deceleration time: |
Range: 0.1-800s |
Input/output and I/O
| Input voltage: |
220V/380V±15% |
| Input frequency range: |
50/60Hz, fluctuation range: ±5% |
| Output voltage: |
0-rated input voltage |
| Output frequency: |
0~50/60Hz |
Peripheral interface
| Programmable digital input: |
2 digital input |
| Communication interfaces: |
Equipped with one isolated RS485, and one extended RS485 |
| Programmable analog input: |
Dual circuit, it can be set as voltage or current input by setting parameters;input voltage range0-10V; input current range 0/4-20mA |
| Analog power: |
4-13,+24V dual power |
| Relay output: |
1 output, programmable |
| Open collector output: |
1 output, programmable |
| Analog output: |
Reserved |
Basic functions
| Command running channel: |
Four kinds of channels: 1. operation panel 2. control terminal 3.serial communication port, choose 1 and 2 for host drive and 3 for auxiliaries 4. pressure of water inlet |
| Internal clock: |
LCD keyboard built-in RTC |
| Integrated PID: |
Advanced PID arithmetic to realize closed loop control system |
| Host and auxiliary drive connection: |
Extensible dual RS485 design, One drive in the system can be host and controls auxiliaries (5 at most) to work by communication mode. Host sends PID feedback to auxiliaries and monitors status of auxiliaries in real time. If failure occurs, the auxiliary will be skipped. The host can control auxiliaries and communicate with upper computer through the extended RS485 at the same time. |
| AVR: |
When grid voltage changes, it keeps output voltage constant automatically. By default, it doesn't work at deceleration. |
| Stall control: |
Automatically limit current and voltage at running period to prevent tripping caused by frequent overcurrent/over voltage. |
| Password setting: |
4-bit password can be set with non-zero numbers. Exit password setting interface and the password will be valid after 1 minute. |
| Parameter lock: |
Define whether the parameter is locked in running or stopped state in case of misoperation. |
Pump control
| Automatic energy-saving: |
Decrease output voltage automatically at light load to save energy. |
| Constant pressure control: |
PID adjustment, PID feedback of break detection, PID sleeping and wakeup |
| Self-starting at power on: |
Optional self-starting at power on, adjustable starting delay |
| Anti-freezing: |
Anti-freezing running frequency, time and cycle |
| Water leakage inspection: |
Optimize sleeping control by water leakage inspection |
Water supply protection
| High pressure alarm: |
Detect feedback pressure to protect pipe network |
| Low pressure alarm: |
Detect feedback pressure to protect pipe network and pumps |
| Water shortage protection: |
Multiple water shortage protection detection modes (including no sensor mode) Controller detects that pipe network pressure is lower than water shortage pressure, system stops working automatically. After set period,it restarts automatically for specified times. If pressure restores to normal, system works normally. Otherwise, system stops automatically in case of idle running of pump and prolongs pump lifetime in maximum. |
| Altitude: |
≤1000m, >1000m service in derated capacity. Derate 1% capacity every 100m increase in height |
Application environment
| Altitude: |
Lower than 1000m, service in derated capacity above 1000m. Derate 1% capacity every 100m increase in height. |
| Environmental temperature: |
-10ºC~+40ºC, service in derated capacity for 40ºC~50ºC. Derate 4% capacity every 1ºC increase in temperature. |
| Vibration: |
<5.9/S2(0.6G) |
| Storage temperature: |
-40ºC~+70ºC |
| Installation environment: |
Installation environment should have be without direct sunlight, dust, corrosive gas, inflammable gas,oil mist, steam, water drop |
Audited Supplier 
){kind=link}
){kind=link}