Basic Info.
Type
Polypropylene Capacitor
Usage
Low Frequency Coupling
Filter
Composite Paper Capacitor
Product Description
Generation Description
CD 60 type capacitor is that of a round aluminum electrolysis for AC motor starting it is suitable for being connected with windings of single phase asynchronous motor of 100H or below as well as three-phase asynchronous motor, to realize power supply for these motors from single-phase system. Motor of rated voltage 500V or below needs aluminum electrolysis capacitor.
Because this capacitor enclosure is made of different material and the leading-out terminal structure is also different, it has kinds of numbers or convenience to order.
Aluminum enclosure: CD60-1-6
Bakelite enclosure. CD60-7
Nylon enclosure(with cap). CD60-8-10
Service Conditions
1. Altitude of installation and operation site is ≤2000m, and the site shall be class I pollution zone.
2. The residual voltage shall not exceed 10% of rated voltage when the capacitor cuts in.
3. The operation temperature of capacitor is-25~+55ºC.
4. The hot and humid severity of capacitor is 21d.
Main Technical Parameter
| Item | Characteristics |
| Rated voltage range | 110~330VAC |
| Nominal capacitance range | 25-1000uF |
| Nominal capacitance tolerance(20ºC,120Hz) | ±10%,±15%,±20%,0~+30% |
| Dissipation factor(20ºC,120Hz) | Tgδ≤0.15 |
| Surge voltage | The medium among leading-out terminals of capacitor shall bear 1. 2Un test voltage for 2s,
it shall not have breakdown or flashover during being tested |
| Load life | Capacitor whose Un is less than 160V, shall be given the test for 1min under power-off, and the capacitor whose Un is >=160V, shall be given the test for 1 min under power-on and 2 min under power-off ,the duration for test is 500h, including the test time is calculated when the capacitor begins to be applied voltage, the test voltage is 0.85 times of max voltage, the max allowable capacitance change is 15% of initial value |
| Insulation level test for capacitor | The insulation between leading-out terminal and enclosure shall bear >=2KV power frequency test voltage for 10S.It shall not have breakdown or flashover during being tested. |
uF
mm
VAC | 110/125 | 220/250 | 275/330 |
| 25 | 30×70 | 34×70 | 34×80 |
| 50 | 30×70 | 34×70 | 34×80 |
| 75 | 30×70 | 34×70 | 34×80 |
| 100 | 34×70 | 34×80 | 42×80 |
| 150 | 34×70 | 34×80 | 42×80 |
| 200 | 34×80 | 42×80 | 50×100 |
| 250 | 34×80 | 42×80 | 50×100 |
| 300 | 34×80 | 50×100 | 50×120 |
| 350 | 42×80 | 50×100 | 50×120 |
| 400 | 42×80 | 50×100 | 65×100 |
| 450 | 42×80 | 50×100 | 65×120 |
| 500 | 50×100 | 65×100 | |
| 600 | 50×100 | 65×100 | |
| 800 | 50×120 | | |
| 1000 | 50×120 | | |
-------------------------------------------------------------------------------------------------------------------------------------------------------
IntroductionThis kind of the capacitors are developed and researched according to standard of American Electronics Association (ANS/EIARS-463).)The external case of the capacitor made of bakelite plasticized that its character are not only good insulating resistance and strong resistance damaged,but also protecting electro -liquid as good sealed feature. It is popular used for the super AC application as good life, higher degree of reliability and stability.Technical data| Operating temperature range | -10~+65ºC |
| Rated Voltage range | 110-330VAC |
| Nominal capacitance range(20ºC, 120HZ) | 21-1200MFD |
| Dissipation factor (20ºC, 120HZ) | tgδ≤0.15 |
| Load life | Under different voltage and electric capacity,1s power-on and 0.5~4min power- off test performed for 12500~50000times continuously shall conform to RS-463. |
| Surge voltage | Applying 1.2times rared voltage for 2 seconds,shall not have breakdown or flashover |
| Withstand voltage between terminal and case | When faults happen, it can bear 2 KV with 10S, and shall have no breakdown or flashover. |
Table of CD60-7 type catacitor norminal capacity,wrking voltage,bkaelite enclosure,normal/UL size.
Model
Enclosure
size | 110/125V | 150/165V | 220/250V | 300/330V |
| Normal | UL | Normal | UL | Normal | UL | Normal | UL |
| 21-25 | 36×69 | 36×70 | 36×69 | 36×70 | 36×69 | 52×86 | 36×85 | 52×86 |
| 25-30 | 36×69 | 36×70 | 36×69 | 36×70 | 36×69 | 52×86 | 36×85 | 52×86 |
| 30-26 | 36×69 | 36×70 | 36×69 | 36×70 | 36×69 | 52×86 | 36×85 | 52×86 |
| 36-43 | 36×69 | 36×70 | 36×69 | 36×70 | 36×69 | 52×86 | 36×85 | 52×86 |
| 43-52 | 36×69 | 36×70 | 36×69 | 36×70 | 36×69 | 52×86 | 36×85 | 52×86 |
| 47-56 | 36×69 | 36×70 | 36×69 | 36×70 | 36×69 | 52×86 | 36×85 | 52×86 |
| 53-64 | 36×69 | 36×70 | 36×69 | 36×70 | 36×69 | 52×86 | 36×85 | 52×86 |
| 64-77 | 36×69 | 36×70 | 36×69 | 36×70 | 36×69 | 52×86 | 36×85 | 52×86 |
| 72-86 | 36×69 | 36×70 | 36×69 | 36×70 | 36×69 | 52×86 | 36×85 | 52×86 |
| 88-106 | 36×69 | 36×70 | 36×69 | 36×70 | 46×85 | 52×86 | 46×111 | 52×111 |
| 108-130 | 36×69 | 36×70 | 36×69 | 36×70 | 46×85 | 52×86 | 46×111 | 52×111 |
| 124-149 | 36×69 | 36×70 | 36×69 | 36×70 | 46×85 | 52×86 | 46×111 | 52×111 |
| 130-156 | 36×69 | 36×70 | 36×69 | 36×70 | 46×85 | 52×86 | 46×111 | 52×111 |
| 145-174 | 36×69 | 36×70 | 36×69 | 36×70 | 46×111 | 52×86 | 46×111 | 52×111 |
| 161-193 | 36×69 | 36×70 | 36×69 | 36×70 | 46×111 | 52×86 | 46×111 | 52×111 |
| 189-227 | 36×85 | 36×70 | 36×85 | 36×70 | 46×111 | 52×86 | 52×111 | 65×111 |
| 216-259 | 36×85 | 36×86 | 36×85 | 36×86 | 46×111 | 52×111 | 52×111 | 65×111 |
| 233-280 | 36×85 | 36×86 | 36×85 | 36×86 | 46×111 | 52×111 | 52×111 | 65×111 |
| 243-292 | 36×85 | 36×86 | 36×85 | 36×86 | 46×111 | 52×111 | 52×111 | 65×111 |
| 270-324 | 36×85 | 36×86 | 36×85 | 36×86 | 46×111 | 52×111 | 52×111 | 65×111 |
| 324-389 | 36×85 | 46×86 | 36×85 | 36×86 | 46×111 | 52×111 | 52×111 | 65×111 |
| 340-408 | 46×85 | 46×86 | 46×85 | 46×86 | 52×111 | 65×111 | 52×111 | 65×111 |
| 378-454 | 46×85 | 46×86 | 46×85 | 46×86 | 52×111 | 65×111 | 52×111 | 65×111 |
| 400-480 | 46×85 | 46×86 | 46×85 | 46×86 | 52×111 | 65×111 | 52×111 | 65×111 |
| 430-516 | 46×85 | 46×86 | 46×85 | 46×111 | 52×111 | 65×111 | 52×111 | 65×111 |
| 460-552 | 46×85 | 46×86 | 46×85 | 46×111 | 52×111 | 65×111 | 52×111 | 65×111 |
| 540-648 | 46×85 | 46×86 | 46×85 | 46×111 | 52×111 | 65×111 | 52×111 | 65×111 |
| 890-708 | 46×111 | 52×111 | 46×111 | 52×111 | | 65×111 | | 65×111 |
| 645-774 | 46×111 | 52×111 | 46×111 | 52×111 | | 65×111 | | 65×111 |
| 708-850 | 46×111 | 52×111 | 46×111 | 52×111 | | 65×111 | | 65×111 |
| 720-864 | 46×111 | 52×111 | 46×111 | 52×111 | | 65×111 | | |
| 800-960 | 46×111 | 65×111 | 46×111 | 52×111 | | 65×111 | | |
| 815-978 | 46×111 | 65×111 | 46×111 | 52×111 | | 65×111 | | |
| 829-995 | 46×111 | 65×111 | 46×111 | 65×111 | | 65×111 | | |
| 1000-1200 | 52×111 | | 52×111 | | | | | |
-------------------------------------------------------------------------------------------------------------------------------------------------------
Introduction CD 60 Series Aluminum Electronic Capacitors are suitable for single Alternating cureent motor with 50 Hz for the use of starting,which can make the motor obtain a higher turning distance under a low starting current. | Item | Characteristics |
| Operating temperature range | -10~+55ºC |
| Rated voltage range | 110-330VAC |
| Nominal capacitance range | 30-1000uF |
| Nominal capacitance tolerance | -10~+30% |
| Dissipation factor(20ºC,120Hz) | tgδ≤0.15 |
| Surge voltage | Applying 1.2 times rated voltage for 2 seconds, Shall not have breakdown or fiashover |
| Load life | Make contact for 1 seconds, shut off 29 seconds, after 37500 times;
Make contact for 1 seconds, shut off 59 seconds, after 15000 times.
Capacitance change:≤±15%
initial value
Dissipation factor: <=0.20 |
µF
mm
VAC | 110/125 | 150/165 | 220 | 250 | 275 | 300/300 |
| 72-86 | 38×97.5 | 38×97.5 | 38×97.5 | 38×97.5 | 38×97.5 | 38×97.5 |
| 88-108 | 38×97.5 | 38×97.5 | 38×97.5 | 38×97.5 | 38×97.5 | 38×97.5 |
| 108-130 | 38×97.5 | 38×97.5 | 38×97.5 | 38×97.5 | 46×125 | 46×125 |
| 157-208 | 38×97.5 | 38×97.5 | 46×125 | 46×125 | 46×125 | 46×125 |
| 161-193 | 38×97.5 | 38×97.5 | 46×125 | 46×125 | 46×125 | 46×125 |
| 216-259 | 38×97.5 | 38×97.5 | 46×125 | 46×125 | 46×125 | 46×125 |
Our Service:
1.We will reply your enquiry within 24hours.Fast Online contact response.
2.High quality,Resonable price,Fast delivery.
3.All products will be inspect strictly before packing.
4.Well and proper packing,reduce the damage in the shipping as much as possible.
5.After-sale service: We gurantee 1 year quality warranty.Within one year,if the products come out any quality problem,we promise to make free replacement.
6.OEM is welcomed:We are accepting customer's design,including the label design,colour box design.
Address:
Rm703, No395 Hongzhong Road
Minhang District, Shanghai, China
Business Type:
Manufacturer/Factory, Trading Company, Other
Business Range:
Apparel & Accessories, Arts & Crafts, Bags, Cases & Boxes, Chemicals, Construction & Decoration, Electrical & Electronics, Industrial Equipment & Components, Instruments & Meters, Textile, Tools & Hardware
Management System Certification:
ISO 9001
Company Introduction:
Shanghai Gaohe is a group established in 2006 and specializes in manufacturing textile machinery and parts, also engage in import and export international trade.
Our company mainly products lines as following:
1. Industrial Equipment & Components
--Textile Machinery
Braiding Machine Series, Tipping Machine Series, Needle Loom Series, Bobbin Winding Machine, Warping Machine, Eyeleting Machine, Cord Knitting Machine etc.
2. Instruments & meters
--Centrifuge Series
Medical Centrifuge, Laboratory centrifuge, Blood Bank Centrifuge, Oil-test centrifuge machine, Gerber Milk centrifuge, Customized Special Centrifuge
3. Tools & Hardware
4. Electrical & Electronics
5. Pump and Pump Parts
5. Garment accessories.
We are always insisting on the principle of"Live on quality, Develop from innovation". High efficiency, energy saving, environmental protecting are the company′s innovative three indicators. Introducing the international advanced production equipment, integrating our rich experience, we have confirmed our goods quality to the in the world leading position.
